Hello everyone! It's Yainea here with a new card and video to share! Today, I created an interactive pull tab card with the fun Rock On set and the Pull Tabs die set.
I colored the background of my scene with Distress Oxide inks and colored the mice with Copic markers. To create the snowy floor I used the Scenery dies. To create the shaker part, I used the Lacy Layers dies to create a frame and glued a piece of acetate on its back, then I adhered that to my background with foam adhesive after adding some sequins. For the sentiment, I die cut some letters with the Cutaway Alpha dies and to add more detail to my card I stamped repeatedly the trees from the Cold Hands stamp set on the card base.
Hello everyone! It’s Channin here with a fun interactive card using some awesome products by Xyron! Today’s card is perfect for little ones, its practically a gift itself. With magnets I create a card that allows the recipient to create their own scene over and over again!
[Technique] Magnetic Interactive Card with Xyron by Channin
First, I stamped and copic colored several images from the Tea for Two and Pawsome Stamp Set, as well as a sentiment from the Across the Miles Stamp Set. I then trimmed slightly around the images that I wanted to add magnet tape too. I then ran these images through the Xyron 1.5” Sticker Maker filled with a Magnet Cartridge. I then die cut the now magnetic images using the matching dies. Next, I stamped and copic colored a couple more images on an A2 panel made from 65lb white cardstock. You definitely want to use thinner weight cardstock for this panel because it will be covering a large magnet panel that the images will need to stick to later.
Next, I masked the images on the panel and then placed a hand cut contact paper mask over the upper portion of the panel and then ink blended distress oxides (Twisted Citron and Lucky Clover) to create the look of grass. I then removed the contact paper mask and then blended more distress oxides (Broken China and Salty Ocean) to create the sky. I then sprinkled a little bit of water over the panel and then used a paper towel to pick up the water droplets. Next, I die cut a frame from 110lb white cardstock and a magnet panel from a magnetic adhesive sheet using the Stitched Layers Die. I then created a simple envelop by die cutting a sheet of vellum with a die from the Lacy Layers 5x7 Die set. Then I folded the vellum almost in half, leaving a 3/4” strip at the top. I then folded this strip over to create a lip and then sealed the side seams with score tape and also added score tape to the back so it can be attached to the card.
Next, I debossed the front of an A2 110lb white card base with a die from the Lacy Layers Die set. I then decorated the front with some of the non-magnetic images that I colored earlier. I then stuck the vellum envelope to the back of the card front. Finally, I adhered the frame to the inside of the card. Then I added the magnetic panel inside and then glued the blended panel over the magnetic panel by placing liquid glue along the cardstock frame. Lastly, I tucked all the magnetic images inside the vellum envelope and sealed it shut with some washi tape.
I hope you enjoyed! Thanks for stopping by!
~Channin
PRODUCTS:
271121 Tea for Two Stamp Set (images) http://waffleflower.com/products/tea-for-two-stamp-set
310151 Tea for Two Matching Die (images) http://waffleflower.com/products/tea-for-two-matching-die
271107 Pawsome Stamp Set (cake-front) http://waffleflower.com/products/pawsome-stamp-set
310138 Pawsome Matching Die (cake-front) http://waffleflower.com/products/pawsome-matching-die
271108 Across the Miles Stamp Set (sentiment) http://waffleflower.com/products/across-the-miles-stamp-set
Hello there! Nichol here today with a Halloween shaker card featuring the Boo Stamp Set and coordinating dies. I find that my favorite shakers are ones where there is stuff going on inside the shaker, on the acetate window, and on the front of the frame! Even though this is a simple design, this adorable Halloween card is sweetly spooky and the interactive shaker element adds lots of fun!
[In the Details] Boo Halloween Shaker by Nichol Spohr
The inside of the shaker was created by stamping the open moon image from the Starry Night Stamp Set on Bristol Smooth paper using Versamark Ink and heat embossing with white embossing powder. The moon and sky were watercolored and set aside to air dry. The front of the shaker was created by die cutting white cardstock with a Lacy Layers Die and a Flower Circles Inverted Die. The frames were secured together with adhesive and backed with a piece of acetate stamped with the spider web image from the Boo Stamp Set using white StazOn Ink.
The “boo” greeting was stamped in the lower right corner of the shaker frame using black ink. The rest of the images from the Boo Stamp Set were stamped on smooth white cardstock, colored in with Copic Markers, and die cut with the coordinating Boo Dies. The bats were adhered to the “inside” of the shaker and the rest of the images on the shaker front. Two layers of foam tape were used to frame up the shaker window and silver and clear star confetti and sequins were used to fill it.
Hello all! It's Yainea here with for Interactive Thursday! Today I'm demonstrating how I made this shaker card using the Sweets stamp set which can be seen and used from both the front and inside of the card.
I heat embossed the background of the front of my card using some images from the Sweets stamp set and decorated the front and inside of the card with the adorable images from the same set.
The sentiments from the Congrats stamp set are the perfect match to complete my celebration card.
Hello! It's Nichol here with an new In the Details video!
Creating your own custom patterned backgrounds is a snap with a layered stamp set. The Pretty Wings stamps makes for a gorgeous background when paired with the awesome Waffle Flower Inks.
[In the Details] Custom Backgrounds by Nichol Spohr
Black paint splatters over the background, add interest and a bit of distressing to the design. In order to still see the butterflies through the greeting, I die cut Lacy Layers from vellum and added a stamped and embossed greeting from the First Step Stamp Set.
Frames were die cut from white and black cardstock using the same dies and layered one on to top of another around the vellum greeting. The background is still visible through the vellum, but slightly muted so it’s still easy to read!
An additional Pretty Wings butterfly was stamped and then die cut before being adhered underneath the greeting, using foam adhesive under the wings to make it appear to have just settled there on the card.
Hello there! It's Nichol here with a new "In the Details" video!
There are times where you don’t need lots and lots of different images to convey your message on a card. Try stamping multiples of a single image, like I did with the bananas from the Willy & Friends Stamp Set for this “Thanks A Bunch” card.
[In the Details] Fun Eyes and Multiple Images by Nichol Spohr
The multiple bananas and greeting perfectly tell the recipient just how thankful you are. Willy from Willy & Friends and a snail from the Snail Mail Stamp Set are the perfect critters for this thank you card and the addition of some decorative eye stickers add a playful and fun touch to the design.
The signage from Snail Mail was customized with a greeting from Willy & Friends using some creative masking. A frame die cut using the Lacy Layers dies perfectly frames up this sweet scene!
These magical slider cards definitely require a bit of paper engineering, but they add a really amazing interactive element to your cards.
I kept things simple by stamping and adhering die cuts to the clear layer so that the decorative scene would remain the same and only the background would change as the slider tab moves up and down. The colorful background was created by watercoloring with Kuretake Gansai Tambi watercolor set. I just adore the bright vivid colors that you can create with this set.
I hope you’ll take a peek at my video today to see how I created the slider element and how the card came together.
Hello everyone! It's Nichol here! Hand stitching love-themed greeting cards is a snap with the Waffle Flower Pinking Layers Die and Stitched Hearts Die! Check out how in my video!
[Video] Sending XOXO - Stitched Valentine's by Nichol Spohr
![[Video] Bugs Pull Tab Card by Yainea](http://cdn.shopify.com/s/files/1/1070/1648/articles/WFC-20171129-BugsPullTabCard-Yainea-1_1024x1024.jpg?v=1514665881)
![[Technique] Magnetic Interactive Card with Xyron by Channin](http://cdn.shopify.com/s/files/1/1070/1648/articles/IMG_6523_1024x1024.JPG?v=1510530170)
![[In the Details] Boo Halloween Shaker by Nichol Spohr](http://cdn.shopify.com/s/files/1/1070/1648/articles/WFC_20170818_BooHalloweenShakerCard_NicholSpohr_1_1024x1024.jpg?v=1503010193)
![[Interactive] Sweets Shaker Card by Yainea](http://cdn.shopify.com/s/files/1/1070/1648/articles/WFC-20170727-SweetsShaker-CristinaNunez-1_1024x1024.jpg?v=1501096567)
![[In the Details] Custom Backgrounds by Nichol Spohr](http://cdn.shopify.com/s/files/1/1070/1648/articles/20170601_WFC_PrettyWingsBackground_NicholSpohr_1_1024x1024.jpg?v=1496349305)
![[In the Details] Fun Eyes and Multiple Images by Nichol Spohr](http://cdn.shopify.com/s/files/1/1070/1648/articles/WFC_20170421_FunEyesandMultipleStampedImages_NicholSpohr_1_1024x1024.jpg?v=1492733641)
![[Video] Interactive - Magical Flower Window Slider Card by Katie Gehring](http://cdn.shopify.com/s/files/1/1070/1648/articles/WFC-20170330-_Magical_Flower_Window_Slider_Card-Katie_-_2_1024x1024.jpg?v=1490910045)
Hello everyone! It's Nichol here! Hand stitching love-themed greeting cards is a snap with the Waffle Flower 
A simple greeting stamped in the center of the large heart from the 
Try switching up the stitching designs and thread colors for greeting cards for lots of different occasions! Supplies: - 
